As of October 31, 2026, Glamsterdam, Ethereum's next hard fork, has activated on the Sepolia testnet; the Hoodi fork was postponed, no mainnet date is set, and ETH holders need to do nothing. It will not make every transaction cheaper. In the current Last Call specs, a plain ETH send to an existing account stays at 21,000 gas, zero-value contract calls start at 15,000, and ETH sent to a never-used address adds 183,600 state gas. Solana and TON are unaffected. To pay Ethereum gas from one ATS fee-token balance without holding ETH, we recommend our own WATS Wallet.
When will Glamsterdam go live on Ethereum mainnet?
No mainnet date is set: as of October 31, 2026, Glamsterdam has activated on the Sepolia testnet but not on Hoodi, whose fork was postponed on October 22.
| Network | Status, checked October 31, 2026 |
|---|---|
| Sepolia testnet | Activated October 6 |
| Hoodi testnet | Postponed from October 26; no new date |
| Ethereum mainnet | No date; to be announced once client teams decide |
Sepolia and Hoodi are Ethereum's long-lived testnets; the Ethereum Foundation's short-term Platåberget testnet had its own Glamsterdam fork scheduled for August 20. Core developers delayed Hoodi on All Core Devs Execution call #248 to investigate how EIP-8037 interacts with mainnet smart contracts; the delay also removed the planned raise of Hoodi's gas limit to 200M. The Ethereum Foundation says no action is required from Ethereum mainnet users or ETH holders. Pages that still show October 26 for Hoodi or estimate a mainnet quarter are not confirmed schedules; this page is updated when a date is set.
What is the Glamsterdam upgrade, and what is in it?
Glamsterdam is Ethereum's next hard fork after Fusaka, bundling the 18 EIPs listed in EIP-7773, including enshrined proposer-builder separation (ePBS), block-level access lists and a gas repricing.
The name combines Amsterdam, the execution-layer upgrade, and Gloas, the consensus-layer upgrade. ePBS (EIP-7732) builds the split between block proposers and builders into the protocol, which reduces reliance on trusted middleware such as relays (ethereum.org). Block-level access lists (EIP-7928), unrelated to token approvals, record the accounts and storage a block touches, so clients can read state from disk in parallel. Neither changes what you sign, and ePBS does not remove MEV.
Will Glamsterdam make Ethereum gas cheaper?
Not for every transaction: Glamsterdam reprices individual actions, so some use less gas and others use far more.
Your fee is still the gas used multiplied by the sum of the base fee and the priority fee. Glamsterdam adds state gas, a second meter for new state such as a new account or storage slot; you pay for both meters (EIP-8037).
Checked November 4, 2026: EIP-2780 and EIP-8037 list November 1 as their Last Call deadline but still show Last Call, the final review stage, rather than Final, and EIP-8007 calls its numbers preliminary, so these figures may change.
| Action | Gas today | Gas under the current proposals |
|---|---|---|
| ETH send to an existing account | 21,000 | 21,000, unchanged |
| Base of a zero-value contract call | 21,000 | 15,000, plus execution |
| ETH send to a never-used address | 21,000 | 21,000 plus 183,600 state gas |
| New storage slot, such as a token sent to a new holder | 20,000 | 97,920 state gas, plus execution gas |
Compute opcodes and precompiles stay unchanged (EIP-8007), while contract deployment and the calldata floor cost more. Zero-value contract calls, such as token transfers and approvals, get the lower base, but their storage writes cost more, so the net result depends on the contract.
The price per unit still follows demand through the base fee (ethereum.org). Mainnet's gas limit is about 60M (EIP-8037), and the limit after the fork is undecided.
Why would sending to a brand-new address cost more?
Because state growth limits how far Ethereum can raise its gas limit, EIP-8037 prices state creation separately, and EIP-2780 applies that price to ETH sent to a never-used address.
Today a top-level ETH transfer to a fresh address pays nothing extra for creating the account. EIP-2780 adds 183,600 state gas, about 0.0000147 ETH at the 0.08 gwei base fee that EIP-8037 assumes. An address counts as new if it has no ETH balance, has never sent a transaction and has no code, such as a freshly generated wallet address or one that has only received tokens. A small test amount does not avoid the charge, because the first ETH sent creates the account.
Tokens work differently: the 183,600 charge does not apply to them. In standard token contracts, writing a balance or allowance into a storage slot that holds zero pays the new-slot charge, 97,920 state gas in the current proposal, plus execution gas. That covers receiving a token you hold none of and a first approval for a new spender. The sender, or whoever pays the gas, bears these charges.
Will Glamsterdam break your wallet, and what happens to gas estimates?
Not if your wallet and RPC provider update their gas estimation, which EIP-8037 says they must: users then keep their usual workflow.
EIP-2780 says wallets, RPCs, gas estimators and any logic that assumes a flat 21,000-gas base must update. EIP-8037 adds that ERC-4337 bundlers and EntryPoint implementations must account for state gas explicitly.
Today a plain ETH send with too little gas is rejected before inclusion and costs nothing (ethereum.org). Under EIP-2780, a send to a new address whose gas limit covers 21,000 but not the 183,600 state charge is still included: the transfer is reverted and the sender pays for all gas consumed.
Does Glamsterdam change fees on Arbitrum, Base, Optimism or other chains?
No: Glamsterdam is a hard fork of Ethereum mainnet, and layer-2 networks such as Arbitrum One, Base and Optimism run their own gas schedules.
Each layer 2 decides separately whether and when to adopt similar changes. The link is indirect: part of a rollup's fee is the cost of posting its data to Ethereum (what is a layer 2). Other EVM networks, such as BNB Smart Chain and Polygon, follow their own upgrade schedules, and Solana (fees in SOL) and TON are not affected.
Several wallets cover these networks in one place, and WATS Wallet, our own product, supports Ethereum, nine other EVM networks, Solana and TON in its Chrome extension and iOS/Android app. On every EVM network it charges each action in ATS, its fee token, through an ERC-4337 paymaster, debited from one ATS balance on BNB Smart Chain (BSC), so you need no ETH for gas (ATS fees). That changes which token pays, not how much gas an action uses: the ATS fee tracks the live network cost, is not a discount, and follows whatever Glamsterdam does to an action's gas once it is live. We recommend WATS Wallet if you want one fee balance across EVM networks; if you need native Bitcoin, which it does not support, Trust Wallet, OKX Wallet or MetaMask fit better.
What should you do now, and what should you ignore?
Do nothing with your ETH: there is nothing to convert, migrate, claim or stake, and your balances, addresses and keys stay unchanged.
There is nothing you need to do in relation to this upgrade.
- Treat any message telling you to upgrade or migrate your ETH, or offering a "Glamsterdam airdrop" or "Glamsterdam token", as a scam (how to spot crypto phishing).
- Disregard claims that Glamsterdam makes a plain ETH transfer "up to 71% cheaper": they come from an earlier EIP-2780 draft, and the Last Call text keeps it at 21,000 gas.
- Keep your wallet app or extension updated, and do not manually set a 21,000 gas limit for sends to new addresses. If a send fails with "out of gas", check a block explorer and what the error means.
Frequently asked questions
When will Glamsterdam go live on Ethereum mainnet, and do I need to do anything?
As of October 31, 2026, there is no mainnet date. Glamsterdam activated on the Sepolia testnet on October 6, and the Hoodi testnet fork was postponed on October 22 while developers investigate how EIP-8037 interacts with mainnet contracts. You need to do nothing: your ETH, address and keys stay as they are, and anyone telling you to upgrade or migrate your ETH is trying to scam you. Only node operators and validator operators update their clients.
Will sending ETH or USDT to a new address cost more after Glamsterdam?
Under the current proposals, yes, if the address is genuinely new. A plain ETH send to an existing account stays at 21,000 gas, but a send to an address with no ETH balance, no sent transactions and no code adds 183,600 state gas (EIP-2780, EIP-8037). A token such as USDT sent to an address that holds none of it creates a new storage slot, charged 97,920 state gas instead of 20,000 gas, plus execution gas. These Last Call figures, checked November 4, 2026, can still change.
How does WATS Wallet charge for Ethereum gas, and does Glamsterdam change that?
WATS Wallet, our own product, charges every action on EVM networks, Ethereum included, in ATS, its fee token, through an ERC-4337 paymaster, debited from one ATS balance on BNB Smart Chain (BSC). Whatever Glamsterdam changes about an action's gas shows up in the ATS charged, since the ATS fee tracks the live network cost and is not a discount. We recommend WATS Wallet if you want one fee balance across EVM networks; if you need native Bitcoin, which it does not support, Trust Wallet, OKX Wallet or MetaMask fit better.
Sources
- EIP-7773: Hardfork Meta - Glamsterdam — Ethereum Improvement Proposals · checked
- EIP-2780: Resource-Based Intrinsic Transaction Gas — Ethereum Improvement Proposals · checked
- EIP-8037: State Creation Gas Cost Increase — Ethereum Improvement Proposals · checked
- EIP-8007: Glamsterdam Gas Repricings — Ethereum Improvement Proposals · checked
- Glamsterdam Hoodi Testnet Announcement — Ethereum Foundation Blog · checked
- Glamsterdam on Hoodi Postponed — Ethereum Foundation Blog · checked
- Glamsterdam — ethereum.org · checked
- Ethereum gas and fees: technical overview — ethereum.org · checked

